Insane amount of Toyota parts
Printed From: Rocket City Rock Crawlers
Category: Classified Ads
Forum Name: For Sale
Forum Description: Stuff for sale
URL: http://www.rocketcityrockcrawlers.com/forum/forum_posts.asp?TID=575
Printed Date: 26 March 2026 at 7:40pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Insane amount of Toyota parts
Posted By: bluetoy
Subject: Insane amount of Toyota parts
Date Posted: 07 March 2005 at 2:25am
|
I just acquired a TON of toyota parts. I have about anything you can think of. If you are looking for anything post up or give me a call at (256) 587-9208. Thanks. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Replies:
Posted By: alabamatoy
Date Posted: 07 March 2005 at 6:31am
|
Birfs. I need BIRFS. To send in as cores for superbirfs. Also need an IFS rear axle shaft. rear quarter panels for a 1'st gen 4runner ------------- "If you didnt buy your 1st gen 4Runner new, then YOU are a newbie!!" BRC Life Member |
Posted By: bluetoy
Date Posted: 07 March 2005 at 6:40am
I've got several rear axles and the alternator bracket that you've been wanting. I have several birfields but I'm keeping them for myself. Sorry No luck on the 4-runner panels. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Al
Date Posted: 07 March 2005 at 1:50pm
I need a Birf also. Thanks, Al |
alabamatoy wrote:Posted By: rolltidezuk
Date Posted: 07 March 2005 at 2:08pm
| I am looking for a rear Toy double cardon driveshaft. And I don't want the one off of your wrecked truck. I may end up running one on the front of my Zuk. JC |
Posted By: Chappy
Date Posted: 07 March 2005 at 3:30pm
| i need a couple driveshaft flanges and velocity joints |
Posted By: bluetoy
Date Posted: 08 March 2005 at 12:10am
|
You need a front driveshaft from an IFS truck. Toyota did not use a CV on the rear. You have to make one from a front. I have several. How about $60 for one? ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: bluetoy
Date Posted: 08 March 2005 at 12:11am
|
I am not selling any birfields. Sorry ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: bluetoy
Date Posted: 08 March 2005 at 12:15am
|
What year are you needing? There are several different bolt patterns on toy driveshaft flanges and CV's. I have some of each. Thanks. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: alabamatoy
Date Posted: 08 March 2005 at 12:45am
|
How much?
Please keep looking....I'll buy a wreck or whatever. ------------- "If you didnt buy your 1st gen 4Runner new, then YOU are a newbie!!" BRC Life Member |
Posted By: Chappy
Date Posted: 08 March 2005 at 3:21am
| im runnin drilled flanges so i dont think it would matter |
Posted By: bluetoy
Date Posted: 08 March 2005 at 3:31am
|
Doc , make me an offer on that stuff. I know where there's a few runners in a junk yard if you want to check them out for some panels.
Chappy, exactly what do you need? I'll try to round it up. We might do some trading on that bed and tailgate you've got. Let me know. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 08 March 2005 at 3:37am
| i need complete driveshafts or just the flanges for the driveshafts that the ujoint is in |
Posted By: bluetoy
Date Posted: 08 March 2005 at 6:11am
|
I have a few old front driveshafts that have bad slip yokes , but good CV's and flanges. Can you use these? ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 08 March 2005 at 7:00am
| YEAH i can...i cant use toyota slip yokes bc they dont slip enough...what kind of trading are you thinkin? |
Posted By: Chappy
Date Posted: 08 March 2005 at 7:02am
| im also looking for a transfer case doubler and trying to sell a side box 4 speed 4x4 tranny and a 2wd 5 speed if anyone is interested |
Posted By: M DODSON
Date Posted: 08 March 2005 at 4:06pm
|
What would the price be for a front cv axel for a 87 ifs ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 09 March 2005 at 12:10am
|
Make me an offer. I dont have a tranfer case doubler. Marlin sells them for $329 , kinda hard to beat that. I have a few transfer cases though. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: bluetoy
Date Posted: 09 March 2005 at 12:11am
|
How about $25 ? ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: alabamatoy
Date Posted: 09 March 2005 at 2:07am
|
How about $30 for a rear axle shgaft and the alt bracket?
I do. Point me at 'em. ------------- "If you didnt buy your 1st gen 4Runner new, then YOU are a newbie!!" BRC Life Member |
Posted By: bluetoy
Date Posted: 09 March 2005 at 3:31am
|
$30 sounds good. There are a few runners at HWY 79 auto salvage , located about 2 miles from the bottom of Skyline on hwy 79. I don't know if they're any good , I just know he has some. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 09 March 2005 at 3:45am
| alll pro offroad has one cheaper than that..how do you wanna trade on those driveshafts...let me know what you have |
Posted By: SushiMonster
Date Posted: 24 March 2005 at 4:41pm
|
do you have an airflow meter/airbox cover for a 22re? If so, how much? sushi |
Posted By: bluetoy
Date Posted: 25 March 2005 at 3:05am
|
I have about 5 of them. How's $20 sound for one ? ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SushiMonster
Date Posted: 26 March 2005 at 2:01pm
|
I am all over one for $20, tell me how to get in touch with you or where I can pick it up. sushi |
Posted By: M DODSON
Date Posted: 26 March 2005 at 2:33pm
|
Do you have a complete wiring harness for a 87 Toyota pick-up. My heater wires shorted out and does not work now. I need it for the A/C to work. ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 28 March 2005 at 12:20am
|
Sushi , I'll pm you my work # . I'll also be at our meeting this wednsday night if you want to pick it up there. MDodson , sounds like you have some bad electrical problems. I don't have a good harness for an '87. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 30 March 2005 at 8:52am
| i have one for an 85 if that helps |
Posted By: M DODSON
Date Posted: 30 March 2005 at 2:27pm
|
I can use the fuse box and about a foot of wire from a 87 pickup or what ever matches. ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: Chappy
Date Posted: 30 March 2005 at 3:50pm
|
if you want it come get it before i take it off for scrap
|
Posted By: M DODSON
Date Posted: 30 March 2005 at 3:57pm
|
I am not sure if a 85 will work or not ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: Chappy
Date Posted: 30 March 2005 at 4:02pm
|
just let me know
|
Posted By: Bryon Mead
Date Posted: 02 April 2005 at 1:06pm
|
do you have a power steering pump?.... puting power steering on my toy thanks, bryon mead |
Posted By: SlamChops
Date Posted: 03 April 2005 at 6:21pm
| got any tail lenses for 85 4runner? 86+ rear axle shafts? |
Posted By: bluetoy
Date Posted: 04 April 2005 at 12:19am
|
Byron, I have a PS pump. I have steering boxes also if you need one. I'll take $100 for both or $40 for a pump.
Slamchops , I have 1 extra axle thats not in a housing.$25. I hate to take a complete '86 + rear end apart just for the axles. I have a complete '89 v6 rear end if anyone needs one. I have several 4cyl rear ends also. I have some tail lights lenses too, but you can buy them new for almost nothing.
------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 04 April 2005 at 4:25am
| all i have is 85 or below...and i need an extra power pump too |
Posted By: SlamChops
Date Posted: 04 April 2005 at 2:08pm
| new, theyre $20 a pop from certifit. i'd rather find some cheap cuz i know they wont last forever. how hard would it be to ship that axle shaft to south AL ? |
Posted By: SlamChops
Date Posted: 04 April 2005 at 6:59pm
|
also, got an ~85 a/c compressor w/ high and low pressure lines? |
Posted By: bluetoy
Date Posted: 05 April 2005 at 2:17am
|
Chappy, I have more PS pumps if you want one. Slamchops, I'll take $15 for both lenses if you want them. How's $60 for an AC compressor and lines? As for shipping , you can call me and we'll discuss it. Thanks ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SlamChops
Date Posted: 05 April 2005 at 4:18pm
i'll definitely be getting with you about the lenses and axle shaft. a
local guy said he'd hook me up with a compressor and lines if i helped
him get his 4runner running. woo hoo! 
|
Posted By: M DODSON
Date Posted: 05 April 2005 at 4:22pm
|
Are you going to the meeting tomorrow? I'm still interested in the Front CV axel for an '87 Toyota pickup for $25. ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 06 April 2005 at 1:36am
|
I'll bring it with me. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SlamChops
Date Posted: 06 April 2005 at 3:26pm
|
i tried calling twice this afternoon.
|
Posted By: bluetoy
Date Posted: 07 April 2005 at 12:04am
|
I got your message , but I accidentally deleted it before I wrote your # down. I'll PM you my work #. I'm easier to get in touch with at work. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SushiMonster
Date Posted: 07 April 2005 at 12:42pm
|
Nick I tried to pm you about the winch mount you were talking about today, would you take $250 for it? That is about all I can scratch together right now. jay |
Posted By: SlamChops
Date Posted: 07 April 2005 at 4:09pm
|
i'll call you in the morning then.
|
Posted By: SlamChops
Date Posted: 10 April 2005 at 8:41am
| i've tried calling all weekend and no luck. can you pm me a price on shipping? |
Posted By: bluetoy
Date Posted: 11 April 2005 at 12:30am
|
Sorry guys , I've not been at home since last thursday night. Slamchops, I'll try to get you a price sometime today. Sushi, we might do some trading on you rebuilding some birfs for me. Call me. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: blue302ranger
Date Posted: 11 April 2005 at 5:14am
|
What's your bottom dollar on the transfer case doubler? very interested. ------------- 83 toyota truck ME : You think we're gonna flip? NICK:Ha, ha, .. .. . wait, .. .Are you serious?! |
Posted By: bluetoy
Date Posted: 11 April 2005 at 8:16am
|
I don't have one. You must be thinking of someone else. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: blue302ranger
Date Posted: 11 April 2005 at 8:51am
|
sorry, I read it wrong
------------- 83 toyota truck ME : You think we're gonna flip? NICK:Ha, ha, .. .. . wait, .. .Are you serious?! |
Posted By: Bryon Mead
Date Posted: 11 April 2005 at 12:38pm
|
nick does that power steering pump come with the mounting bracket and resivour |
Posted By: bluetoy
Date Posted: 12 April 2005 at 12:41am
|
It comes with the bracket and idler pulley, but I don't have a resovoir or lines. I might can find one if you need me to. Thanks. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: M DODSON
Date Posted: 20 April 2005 at 1:23am
|
Do you have a stock rear bumper and the drivers side rear panel on the bed. If so what kind of price? Thanks ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 20 April 2005 at 3:20am
|
I don't have either one in good condition. I can build you a back bumper if you want me to. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: alabamatoy
Date Posted: 20 April 2005 at 6:12am
|
My black runner at Clint's house may have that stuff..... ------------- "If you didnt buy your 1st gen 4Runner new, then YOU are a newbie!!" BRC Life Member |
Posted By: M DODSON
Date Posted: 21 April 2005 at 12:11pm
|
what kind of price on a back bumper that you can make ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 21 April 2005 at 11:55pm
|
All depends on how you want it made. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Bryon Mead
Date Posted: 27 April 2005 at 2:52pm
|
Hey Nick, ill take the pump, bracket,and pulley. Is this all still $40? ill have my dad call you at work.Also, about the carb. and swap on tranny. is that still a go? thanks much. |
Posted By: bluetoy
Date Posted: 28 April 2005 at 3:24am
|
Sounds good . Give me call ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 28 April 2005 at 5:13am
| i have a chrome tube bumper for a toyota if you still need a bumper pm me |
Posted By: rolltidezuk
Date Posted: 03 May 2005 at 3:48pm
| Nick, do you have a steering shaft from toy truck? I got a steering box from a FJ60 and was told that a truck shaft will fit. Thanks, JC |
Posted By: bluetoy
Date Posted: 04 May 2005 at 3:24am
|
I have several. What year would you like? ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jr hall
Date Posted: 24 May 2005 at 4:25pm
|
hey man, you wouldnt happen to have a resivour cap that goes on top of the master cylinder for an 88` toyo with 22re motor.dont need the resivour but i just need the cap with the two wires and plug end. i believe it is called the leveling senser but i dont know for sure. or do you know where i can find one cheap. ------------- http://www.myspace.com/jrhall1985 88` toyo truggy- 36in tsl,dual cases, 22re,detroits, 4.88s, chromo 30-splines longfeilds,beadlox,half doors, narrowed,dovetailed adn bobbed, hydroassist, |
Posted By: bluetoy
Date Posted: 25 May 2005 at 12:31am
|
Yeah , I have one. $5 if you pick it up. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jr hall
Date Posted: 25 May 2005 at 12:28pm
|
i happen to find one at complete auto salvage, for 5 bucks but thanks ------------- http://www.myspace.com/jrhall1985 88` toyo truggy- 36in tsl,dual cases, 22re,detroits, 4.88s, chromo 30-splines longfeilds,beadlox,half doors, narrowed,dovetailed adn bobbed, hydroassist, |
Posted By: rolltidezuk
Date Posted: 26 May 2005 at 5:27am
| Nick, besides the steering shaft, I also need a rear driveshaft from an ifs truck if you have one. JC |
Posted By: bluetoy
Date Posted: 26 May 2005 at 6:29am
Short wheel base, or does it matter?? Why from an IFS ? All 84 to 94 SWB 5spd driveshafts are the same. Are you sure you don't need an IFS front driveshaft to make a rear driveshaft out of ? They make good rear driveshafts on rigs with a short wheel base or dual t-cases. Either way, I have both. Let me know ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: rolltidezuk
Date Posted: 26 May 2005 at 3:35pm
| I have one front toy shaft to use on my Zuk rear, But I could use a spare. On the rear shaft either long or short wheel base will work, because it will have to be cut down. And if either has a better ujoint (will work at more of an angle), that is what I need. Do you still have a 33 I can use for a spare? Tell me how much for all this, and I'll see you at the meeting next week. Thanks, JC |
Posted By: bluetoy
Date Posted: 31 May 2005 at 2:57am
|
I'll bring the steering shaft and the drive shaft to the meeting. (how's $50 for both ?) The only 33" spares I have right now are completly bald. If you can hold off for a while I will have some nice BFG m/t's with a little tread left you can get. If you need one now I can bring one of the bald ones. Free if you want one. I have a bunch of spare wheels also if you need a wheel to mount a spare on. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: rolltidezuk
Date Posted: 31 May 2005 at 7:30am
| sounds good. I'm in no hurry for the spare. Thanks, JC |
Posted By: Al
Date Posted: 08 June 2005 at 3:46am
|
Nick, How much for the OEM gas fill hose from that blue '89 4Runner (or equivalent)? Al
|
Posted By: bluetoy
Date Posted: 08 June 2005 at 11:57pm
|
I don't have the blue '89 4-runner. Is the fill hose the same on a 4-runner as a pickup? If so I'll give you one , but I don't have one for a 4-runner. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Al
Date Posted: 09 June 2005 at 12:54am
|
I thought you bought the blue '89 from Danny after I sold it to him? Oh well, yea I think the pickup and 4Runner hose is the same, mine looks the same as on your old blue toy. I need one to graft a 26 gallon tank on my 4Runner. Thanks, next meeting? Al
|
Posted By: bluetoy
Date Posted: 09 June 2005 at 3:33am
I just got the EFI and bought the engine out of it.
I'll bring the hose to the next meeting.
------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Al
Date Posted: 10 June 2005 at 11:03am
|
OK, thanks! Al |
Posted By: SlamChops
Date Posted: 10 June 2005 at 1:32pm
|
hey man, still got that v6 rear axle?
------------- Later on, Walter P. www.lockitupoffroad.net |
Posted By: bluetoy
Date Posted: 13 June 2005 at 3:27am
|
Yeah, I still have it. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SlamChops
Date Posted: 13 June 2005 at 4:20pm
|
how much you want for it? will those shafts fit the same as the 4cyl axles? ------------- Later on, Walter P. www.lockitupoffroad.net |
Posted By: bluetoy
Date Posted: 13 June 2005 at 11:58pm
|
$175 and yes the axles are the same as the 4cyl. Thanks. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SlamChops
Date Posted: 14 June 2005 at 1:41am
any spare birfs? 
------------- Later on, Walter P. www.lockitupoffroad.net |
Posted By: bluetoy
Date Posted: 14 June 2005 at 3:26am
|
I have some , but they are not for sale. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jposey66
Date Posted: 21 June 2005 at 12:11pm
|
I'm looking for a 4 cyl T-case. I want one from a 84-88 truck or runner with tranny code G52, G54, or W56. Do you have anything like that?
Thanks, Jeff Posey Madison, AL ------------- 86 Toyota Pickup, 5.0L EFI, AOD, Total Chaos LT IFS, 33x12.50 BFG's, BAJA Nut http://locosmocos.com - see my latest Baja adventure here |
Posted By: alabamatoy
Date Posted: 21 June 2005 at 3:05pm
|
Careful, they are only the same if they are off an IFS.....the solid axles had narrower axles. ------------- "If you didnt buy your 1st gen 4Runner new, then YOU are a newbie!!" BRC Life Member |
Posted By: bluetoy
Date Posted: 21 June 2005 at 11:16pm
Do you need a top shift or forward shift? All G52's and G54's were forward shift , and 85-88 W56's were top shift. All '89-'95 W56's were forward shift. A forward shift "G" series also has different length shift rods than a forward shift "W" series. If you need a top shift , anything from '79-'83 will work . They were all top shift. Find out exactly what you need and I'll see what I've got. Thanks. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: bluetoy
Date Posted: 21 June 2005 at 11:20pm
I knew that he's running an IFS rear , but you are correct. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jposey66
Date Posted: 21 June 2005 at 11:32pm
|
Yea, the different shift rod length, on the 89-95, is why I only want one through 88. I would have to swap shift rods in those cases. I don't want 79-83, because they are "noisy run gears", per Advance Adapter, which is where I am getting most of my info on what I need. This all narrows it down to 84-88 and leaves a choice of forward shift or top shift. I think, for my application, my first choice would be top shift(W56) but would also consider a forward shift(G52, G54).
Thanks, Jeff Posey Madison, AL ------------- 86 Toyota Pickup, 5.0L EFI, AOD, Total Chaos LT IFS, 33x12.50 BFG's, BAJA Nut http://locosmocos.com - see my latest Baja adventure here |
Posted By: bluetoy
Date Posted: 22 June 2005 at 3:30am
|
What are you doing with it, and what are you putting it in? If your adding a dual t-case, your rear-most t-case MUST be a top shift. The front case or "crawl box" must be whatever fits your tranny. As far as the "noisy" or "quiet" gears , that don't mean jack. I have run both and can't tell any differance. You need to check out http://www.marlincrawler.com - www.marlincrawler.com . They have all the info you need. I'm not sure what AA sells a dual case adapter for , but marlins is $330. Also check out the dual case comparison chart. It has some good info on the different brands of adapters. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jposey66
Date Posted: 22 June 2005 at 2:29pm
|
Putting a 5.0L and AOD in an 88 V6 4runner, so I need the 4 cyl T-case. The adapter will work with both the top shift cases and the earlier forward mounted shifter cases. As far as the quiet vs noisy cases, it is currently very quiet, with no noises, rattles, or squeaks, except for the noise of the tires that I am about to replace. I really like it that way and, if there is "noisy vs quiet" on anything, I want to take the "quiet" choice.
Jeff Posey Madison, AL ------------- 86 Toyota Pickup, 5.0L EFI, AOD, Total Chaos LT IFS, 33x12.50 BFG's, BAJA Nut http://locosmocos.com - see my latest Baja adventure here |
Posted By: bluetoy
Date Posted: 22 June 2005 at 11:40pm
|
All I have in a top shift is an '80 model. Like I said , I can't tell that one is quieter than the other. I have had both and can't tell any difference. I have an '82 t-case as the rear case for my crawler in my '89 and it's not noisy at all. If your that concerned about it , you are more than welcome to come drive my truck. Either way, I'll take $100 for it if you want it. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jposey66
Date Posted: 23 June 2005 at 12:15pm
|
If you don't think it makes any more noise than the others, I may give it a try. I'd like to come take a look at it. Where are you located? I am in Madison and can usually be reached on my cell at 714-5885.
Thanks, Jeff ------------- 86 Toyota Pickup, 5.0L EFI, AOD, Total Chaos LT IFS, 33x12.50 BFG's, BAJA Nut http://locosmocos.com - see my latest Baja adventure here |
Posted By: bluetoy
Date Posted: 23 June 2005 at 11:55pm
|
I'm located at Skyline , about an hour drive from madison. You can call me at 587-9208 . I'll be home all weekend if you want to come look at it. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jposey66
Date Posted: 24 June 2005 at 12:08am
|
PM'd you, Nick. ------------- 86 Toyota Pickup, 5.0L EFI, AOD, Total Chaos LT IFS, 33x12.50 BFG's, BAJA Nut http://locosmocos.com - see my latest Baja adventure here |
Posted By: M DODSON
Date Posted: 26 June 2005 at 7:16am
|
Is the 22r block from a 81 the same as the block of a 87. and what of the head wil they interchange? ------------- OUT4X4LAW8@AOL.COM Trinity Al |
Posted By: bluetoy
Date Posted: 27 June 2005 at 12:36am
|
No, they are not the same , and they will NOT interchange. Anything '85 to '95 will work on your '87. The '84 down 22r's had a taller block and head. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: SlamChops
Date Posted: 30 June 2005 at 1:57pm
thanks for the rear axle dude. you got a nice place u p there. hope we can get up there and wheel later this year. 
------------- Later on, Walter P. www.lockitupoffroad.net |
Posted By: bluetoy
Date Posted: 05 July 2005 at 3:47am
|
Thanks I've just about got my rig finished so maybe I'll be able to get out and do some wheeling soon. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: jr hall
Date Posted: 05 July 2005 at 10:43am
|
you wouldnt happen to have the short hose on the intake of a 22re motor, mine tore and need to fix it cuz it wont run . it is the rubber hose that connects from intake to the plastic tubing that runs out of the mass air. only bout a foot long or less . also how much? ------------- http://www.myspace.com/jrhall1985 88` toyo truggy- 36in tsl,dual cases, 22re,detroits, 4.88s, chromo 30-splines longfeilds,beadlox,half doors, narrowed,dovetailed adn bobbed, hydroassist, |
Posted By: bluetoy
Date Posted: 06 July 2005 at 12:06am
|
I think I just sold the only one of those I had. Let me check and see if I have another one. ------------- TOYOTA FOUR WHEEL DRIVE................need I say more? |
Posted By: Chappy
Date Posted: 06 July 2005 at 3:27am
| are their any special markings on these motors? i need to know exactly what i have before i start buying rebuild parts. |