Bumper Welding
Printed From: Rocket City Rock Crawlers
Category: Classified Ads
Forum Name: Wanted!
Forum Description: Ads asking for stuff....
URL: http://www.rocketcityrockcrawlers.com/forum/forum_posts.asp?TID=11219
Printed Date: 26 March 2026 at 11:02pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Bumper Welding
Posted By: Alexia
Subject: Bumper Welding
Date Posted: 05 July 2014 at 4:41pm
|
I have this kit from JCR Offroad that I need expertly welded together. Some of the pieces require welding front and back for strength. This bumper is designed for towing so I am not going to unsafely weld it together. http://www.jcroffroad.com/product/MJREAR/DIY-MJ-R.html I figure it would cost around $200 to have to done based on the cost difference between a DIY kit and a fully welded product. I have already done a majority of the bending except for some of more difficult bends that my make shift Jeep tire press was unable to handle. As well I can do the finish grinding and sanding work. So if you can do this or would recommend a place I would gladly drop it off. If this can be done in ten days time by the 15 that would be even better. |
Replies:
Posted By: muddin'metal
Date Posted: 06 July 2014 at 6:15am
| Custom fab in Decatur |
Posted By: Mike_LaMar
Date Posted: 06 July 2014 at 2:42pm
|
You might try Xtreme Roc Rigs that has an add in the top right corner sometimes or Rocket City Off Road on Jordan. I've also had some work for the office done by the shop on Airport Road but they seemed pricey back in 2007. Mike ------------- 2007 Jeep Wrangler Unlimited Rubicon, 4" Superlift Suspension, 37" Toyo MTs "History does not long entrust the care of freedom to the weak or the timid. - Dwight D. Eisenhower |
Posted By: scoutman
Date Posted: 07 July 2014 at 4:53am
|
Jake may be able to knock this one out for you. ------------- 76 Scout II in pieces 96 Jeep XJ 33's 99 Jeep XJ Limited 06 Dodge 3500 W5LZQ |
Posted By: cj8lvr
Date Posted: 07 July 2014 at 5:49am
|
Bring it to me. I'll take care of it for you. I can probably have it done by the end of this week. I'm unemployed. So this would give me a little sense of "employed". Give me a call or text whenever you can today and I can get you to the house. Cell: two five six seven 1 four two thousand ------------- ___/| [_\__\], l___l__L-O|||||O_ _()_)__()_)___()_) Jake White Owner of CartoTracks.com Trail Maps Past RCRC - VP Past Nat'l CJ-8 Scrambler Owners Association President |
Posted By: XRR
Date Posted: 07 July 2014 at 3:47pm
|
Be glad to do it for you but try Jake first. His work is top notch plus he needs the bones. BTW - Thanks for the Props Mike!! Thanks XRR ------------- eXtreme Roc Rigs Your Off-Road Parts and Accessories Source! http://www.extremerocrigs.com" rel="nofollow - www.extremerocrigs.com [EMAIL=sales@extremerocrigs.com]sales@extremero |
Posted By: Alexia
Date Posted: 07 July 2014 at 4:43pm
I contacted Jake will be dropping it off tomorrow. Thanks everyone! |
XRR wrote: