Anyone have a Bore Scope?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   All,
My 96 Dodge PU is down.  I believe a stud and locknut in the back end of the fuel injection pump have backed out and are now down inside the pump.  The truck will run 70+ mph without my foot on the go pedal! This happened on the way back from our club meeting Thursday night.  Lets just say I was happy to have 72W all to myself. I would like to use a bore scope to look inside the pump to see if I can find/remove the stud/locknut and look for damage.  This is in the non fuel side of the pump.  I will need to drain some oil out to have a clear view to the bottom. Other wise the pump must come off and go to a diesel injection pump shop. Please ask around if you know somebody that might have one.

thanks,

Don

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dontoy Members Profile Send Private Message Find Members Posts Add to Buddy List RCRC Club Member Hail HURTS...aske me how I know! Joined: 16 May 2004 Location: Athens, Limestone County Status: Offline Points: 889	Post Options Post Reply Quote dontoy Report Post Thanks(0) Quote Reply Topic: Anyone have a Bore Scope? Posted: 09 September 2007 at 8:11am
	All, My 96 Dodge PU is down. I believe a stud and locknut in the back end of the fuel injection pump have backed out and are now down inside the pump. The truck will run 70+ mph without my foot on the go pedal! This happened on the way back from our club meeting Thursday night. Lets just say I was happy to have 72W all to myself. I would like to use a bore scope to look inside the pump to see if I can find/remove the stud/locknut and look for damage. This is in the non fuel side of the pump. I will need to drain some oil out to have a clear view to the bottom. Other wise the pump must come off and go to a diesel injection pump shop. Please ask around if you know somebody that might have one. thanks, Don
	1985 ToyBuggy w/TBI GM4.3/TH350, Marlin doubler, 4.88's, locked front & rear, 37" TSL SXII, and other stuff.